|
|
Family house
Leupold, Karel ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
Bachelor´s thesis solve design of the Family house in city Telč. It is a two-storey house with a partial basement, the roof is pitched with a slope of 35°. The house is designed of brick POROTHERM. The building is set on a land slightly sloping. The object is designed by valid standard.
|
|
|
Family house
Králíková, Zuzana ; Slávik, Richard (referee) ; Hlavačka, Tomáš (advisor)
This Bachelor´s thesis solves a project of family house for one generation. Object has two floors and basement. The second floor is realised as an attic. Garage is a part of a house. Supporting parts of construction are made of POROTHERM system. The saddle roof is created with concrete tiles KMB Hodonka. Object is insulated by ETICS system. The building is situated in Letohrad. Surrounding terrain is flat. The project is focused on implementation part of documentation and treatment of particular details.
|
|
|
Structural assessment of the reinforced concrete chimney
Teplý, Jakub ; Hasala, Ivo (referee) ; Girgle, František (advisor)
The aim of this thesis is assessment of existing condition reinforced concrete factory chimney, who has undergone structural and technical survey, under which was found many failures caused of horizontally tension - significant vertical cracks in the chimney stack. The object of this work will also make appropriate proposals rehabilitation of concrete stack by design prestressed cables monostrand in horizontal direction, grouting open cracks and reprofiling surface of chimney stack.
|
|
|
Detached house with design office
Horňáková, Veronika ; Holešovská, Anna (referee) ; Utíkalová, Ivana (advisor)
The topic of this bachelor thesis is a new family house with project office in Uherský Brod. Family house is located on flat land in a short distance from the city center. The building is two-floor. In the first floor is located entrance to the building, storeroom, utility room, living room, sbathroom, WC and project office with own entrance and WC. From the first floor is also entrance to the terrace and garden. In the second floor is situated bedroom with dressing room, two bedrooms, bathroom and WC. From one of the bedroom is possible to access to the balcony. The roof above the first floor is flat, the roof above second flat is mono-pitched roof. The building is made of structural masonry system Porotherm 30 P+D, insulation system EPS 100F, roof truss from bonded girder, roof covering foil Fatrafol. Garage is designed as a detached building roofed with a flat roof. Garage is made of the structural system Porotherm 30 P+D. Project Documentation is created in AutoCAD.
|
|
|
Restoration of limestone in Grygov
Varga, Peter ; Mikeš, Stanislav (referee) ; Guzdek, Adam (advisor) ; Šuhajda, Karel (advisor)
The topic of the bachelor thesis is the restoration of former limestone in the village of Grygov. The document is based on an architectural study prepared within the subject AG034 Studio of Architectural Creation – Restoration of Monuments. The limestone building is located southeast of the built-up part of the village Grygov in connection with a significant landscape phenomenon of limestone quarries. Restoration is solved as a conversion, when the building is changed its original function. At the same time, it is a modernization of the building with an emphasis on preserving its original character. The intention was to convert the industrial building and industrial spaces into a multi-purpose cultural centre. The concept of restoration is to preserve the unique areas of the limestone factory, searching for a connection between the industrial character of the limestone factory from the 19th century and new, modern constructions. The object was approached by the principle of preserving what is valuable and replaceable or cancelling non-renewable parts. The proposed changes do not disturb the overall architectural character and appearance of the existing building. Dispositional changes are proposed by resolving the disposition of the limestone factory to the multifunctional centre. Unique spaces and structures will be preserved, namely an oval furnace, a walkway, a wooden ceiling, a perimeter wall made of quarry stone, a chimney and the eastern part of the roof. The building on the northwest side is in a demolished condition due to a collapsed roof structure. The spaces on the 1st floor are functionally divided into three parts. Exhibition, multifunctional spaces, sanitary and technical equipment, small restaurant with bar. The spaces on the 2nd floor are divided into two parts. A large hall, which is connected by a staircase to the ground floor. The attic space of the 2nd floor is divided by the chimney.
|
|
|
Pearl Ústí nad Orlicí
Hyťhová, Martina ; Kyselka,, Mojmír (referee) ; Nový, Alois (advisor)
Main task of the diploma project is design of conversion strategy and revitalization of former textile factory PERLA 01 in Ústí nad Orlicí. The construction program consist conversion of existing building to cafébar, assembly hall, office space, shoping hall, bistro and craftsman´s workrooms. New building is infocentrum, gallery, textilmania, entrance hall of assembly hall, cycling shop, library reserve space and club centrum. The project design new square and public space.
|
|
|
Residential Building
Uhlíř, Karel ; Šafařík, Martin (referee) ; Sukopová, Dáša (advisor)
Diploma thesis develops comprehensive documentation of the new building construction of residential house on the level of the implementation of the project construction. Proposal emphasizes layout of linked to ensure the technical design, structural, fire safety, protection against noise, energy saving, safety in use. Work is performed in an electronic format using AutoCAD and Microsoft Word (PDF Creator).
|
|
|
Heating of flat house
Jára, Marek ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
The theme of this diploma thesis is to design heating of the flat house. The theoretical part of this diploma thesis is about exhaust gases paths. The calculation part of this diploma thesis contains the design of the heating system by panel heaters, floor convectors and underfloor heating system. The heat source is the system of cascade-connected gas condensing boilers. The rest of this part are the calculations of the preparation of hot water, design of hot water storage tank and another necessary equipment of the system. The part Project is about technical report and simulation of behaviour of underfloor heating system in various marginal conditions.
|
|
|
Family house with a brewery T: O: P in Jevíčko
Němeček, Pavel ; Vávra, Petr (referee) ; Brzoň, Roman (advisor)
Bachelor´s thesis is focused on a project of a detached family house with a brewery T:O:P on a site 88/13 and 88/14 in a Jevíčko. Bachelor´s thesis is drawn in a project documentation for the realization of building. The house has two floors without cellarage, rectangular plan with flat roof, based on strip foundations made of a simple concrete. Vertical frameworks are devised from masonry type therm from Porotherm. Horizontal frameworks are from ceiling panels Spiroll. External wals are warmed by a contact system from polystyrene. Entry into the brewery premises and residential units, located on the second floor, is oriented to the southeast, entrance to the brasserie on the southwest. 1.NP is divided into two service. The service brewery with his technological background and administrative background brewer. The second service is brasserie brewery with his social service and visitors. Housing unit is separated from the brewery and brasserie ceiling constructions and has its own entrance from the open air.
|
|
|
Chimneys draft and connecting fuel appliances
Kupka, Filip ; Formánek,, Marián (referee) ; Počinková, Marcela (advisor)
Diploma thesis deals with problematics of offtake of flue gasses. In experimental part there was measured compound of flue gasses by analyzator of flue gates. Aplication is a project of heating of object of The Academy of Sciences of the Czech Republic in Brno. Project solves design of heating system, flue and of source of heat. Heating area is created by floor convectors,towel rails and radiators. Source of heat is designed in two variants : as a cascade of condensation boilers and as a cascade of low-temperature boilers.
|
guest ::
